HOW IT IS CALCULATED
Estimate layer height from nozzle diameter
Apply a selected layer-height percentage to nozzle diameter.
Instant resultClear formulaRuns locally
01Values
02layer height = nozzle diameter × ratio/100
03Result
0.4 mm nozzle at 50% → 0.2 mm layer height.
This is a geometric ratio, not a printer guarantee
Practical layer-height limits also depend on hotend, extrusion consistency and printer settings.
02
In short
What logic does the calculator use?
layer height = nozzle diameter × ratio/100
Example?
0.4 mm nozzle at 50% → 0.2 mm layer height.