HOW IT IS CALCULATED
Calibrate extruder E-steps
Correct current E-steps using requested and actually extruded filament length.
Instant resultClear formulaRuns locally
01Values
02new E-steps = current × requested ÷ actual
03Result
If only 95 mm is extruded when 100 mm was requested, E-steps increase.
Accurate physical measurement is essential
Any error in the measured extrusion length directly affects the calculated calibration value.
02
In short
What logic does the calculator use?
new E-steps = current × requested ÷ actual
Example?
If only 95 mm is extruded when 100 mm was requested, E-steps increase.